Installation Manual

4
Device openings must
span across deck
CAUTION: Cover must be removed to rotate Poke Thru once it has been installed in the floor.
Step 1 Orient Stem Assembly such that the three channels span across the corrugations of the deck.
I
nsert Stem Assembly into core hole.
Step 2 Remove disposable plate and (2) plate clips by removing the 8-32 screws. Install Flange using the
(2) 8-32 x 1/2" Cap Head screws provided with the cover assembly.
I
NSTALLING STEM ASSEMBLY AND SEPARATE COVER
A A B B