Operating instructions

WirelessHART Fieldgate SWG70 15 Technical Data
Endress+Hauser 89
15.6 Operability
Configuration • Web browser via Ethernet
• FieldCare via Ethernet (HART IP CommDTM) or RS-485 (serial CommDTM)
Operating elements • 2x Pushbuttons within housing for selecting operating mode during local configuration
• 5x LEDs within housing for indicating current operating mode during local configuration
• 1x 8-gang DIP switch for Address (1 - 4), Baudrate (5-6), Termination (7) and security mode (8)
– Hardware settings can be overridden by software settings
IP address Configurable via Web browser or DTM, default 192.168.1.1
15.7 Certificates and Approvals
CE Mark In attaching the CE Mark, Endress+Hauser confirms that WirelessHART Fieldgate SWG70
conforms to all relevant EU directives.
Telecommunication
compliance
• Brazil: ANATEL 2759-11-7311 (EAN Number: 7898994191414)
• China: CMIIT ID (SRRC)
• ETSI (R&TTE)
• FCC Part 15.247 for wireless applications in the 2.4 GHz frequency band
• Japan: Ministry of internal affairs and communication
• Mexico: COFETEL RCEPNSW12-0651
• Other national certificates are available on request.
Additional national guidelines to be observed:
Hazardous area approvals See Chapter 2.2
Country Guideline
Bulgaria General authorization required for outdoor use and public service
Italy If used outside of own premises, general authorization is required
Norway May be restricted in the geographical area within a radius of 20 km from the center
of Ny-Alesund
Rumania Use on a secondary basis. Individual license required
Latvia The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic
Communications Office