Operating instructions

11 Additional Functions WirelessHART Fieldgate SWG70
78 Endress+Hauser
11.7 Set Device Addresses (DTM)
Set Device Addresses displays all adapters, together with their wired connections, that can be
seen in the network. The device address is the device long tag stored in the device.
Set Device Addresses allows the user to match the addressing of a physical device, i.e. the Long
Tag in WirelessHART networks, to the one stored in the DTM. The function is not relevant to
FieldCare but might be required for other FDT frames.
1 Right-click on Fieldgate SWG70 node and select Additional Functions =>Set Device
Addresses.
To change the device address:
2 Place the cursor inside a cell of the Device Long Tag column
3 Change the device long tag as required. You may change the long tags of several devices at
once, if needed
4 To apply the new DTM address(es) press Update Changed Tags
– The new DTM addresses are stored to the devices
– Refresh updates the list