Operating instructions

11 Additional Functions WirelessHART Fieldgate SWG70
76 Endress+Hauser
11.3 About
About gives information about Fieldgate SWG70. If called from FieldCare, it also gives information
about the DTM.
1 Click on the Additional Functions> About leaf to open the dialogue:
11.4 Firmware Upgrade (Web Server)
Firmware Upgrade allows new firmware to be downloaded to the gateway
1 Click on the Additional Functions> Firmware Upgrade leaf to open the dialogue:
2 Browse to the folder or location at which the firmware package is to be found (*.ipk, *.tar.gz)
3 Press to Upload the Package >>
– The following page appears
4 Press the Install the Package >> button to install the firmware
– To cancel the firmware upgrade, press Discard Upgrade
5 The package will now be installed.
– The installation process may take a while.
– When the installation is finished, Installation Successfully Completed together with a
log is displayed on the screen.
6 After installation, Fieldgate SWG70 restarts with the new firmware
– The network configuration of the old firmware is retained