Operating instructions

10 Engineering WirelessHART Fieldgate SWG70
60 Endress+Hauser
10 Engineering
10.1 Instrument List
10.1.1 General
This leaf contains a list of instruments in the network. It is also possible to add individual devices
that are still to be connected.
1 Click on the Engineering => Instrument List leaf to display the associated parameters:
– The significance of the parameters is described in the table below
Instrument List parameters
Parameter/Field Meaning
Instrument List Displays tabular information identifying the device:
• Index: Order of the device determined according its type and the time at which it
joined the network
• Long Tag: Long Tag of connected device (= Message <HART 5)
• IO card: Identifier of Fieldgate card used by the device
• Channel: Identifier of card channel used by the device
• Device ID: HART serial number that is assigned at manufacturing time and that differs
for each HART device of a given type
• Extended Device Type Code: Unique code identifying the HART product family
Delete button Deletes a device from the instrument list
– Press Apply to register the change in Fieldgate SWG70
– If the device is still communicating with the network, it will automatically reappear in
the list at the next refresh
– Caution! Deleting a device from the instrument list can change the Modbus register
address if the Modbus addresses have been automatically generated.
Export/Export CSV Exports the current instrument list as a CSV file
Import/Import CSV Imports an instrument list that has been stored as a CSV file
Import Project Tree (DTM) In Offline Parameterize dialog, imports the network view to the Instrument List
Refresh Updates the instrument list
– After switching on or resetting the device, wait at least one minute before pressing the
Reset button.
Apply Stores the current instrument list in Fieldgate SWG70