Operating instructions

7 Commissioning WirelessHART Fieldgate SWG70
38 Endress+Hauser
7.5.4 Scan for wireless devices in the network
After Fieldgate SWG70 has been configured, see Chapter 8.2 onwards, you may want to scan for
other devices in the network
1 Right-click on the Fieldgate SWG70 node and select Create Network...
– You can also click on the Create Network icon to do this
– The Fieldgate SWG70 is put on-line and the two arrows turn green
2 The Fieldgate CommDTM now scans the wireless network and automatically adds all
WirelessHART devices found to the network (in our case the SWA70 adapters):
Note!
– If no device is found although communication has been established, check that the adapters
have been configured with the correct network identification and join key
– It may take up to ten minutes for a wireless device to join the network after download of
the Network ID and Join Key
– To increase the performance of a connection to an adapter it is possible to open a fast pipe,
see Chapter 8.2.3.