Operating instructions

7 Commissioning WirelessHART Fieldgate SWG70
36 Endress+Hauser
7.5.2 Add the Fieldgate SWG70
1 Right-click on the HART IP Communication node and select Add Device:
2The Add New Device dialog opens:
– Select WirelessHART Fieldgate SWG70 and press OK
3 The dialog closes and the Fieldgate SWG70 DTM is added below the HART IP node
4 If the factory IP address (192.168.1.1) or Ethernet Port (5094) of the Fieldgate SWG70 has
been changed, right click on the HART IP Communication node and select Additional
Functions => Set DTM Addresses
–The Set DTM Addresses Dialog opens:
5 Enter the new IP address and/or Ethernet UDP Port number and press Update Changed
Data
6 Close the dialog – the Fieldgate SWG70 can now be put online