Operating instructions

WirelessHART Fieldgate SWG70 C Appendix: HART OPC Connection
Endress+Hauser 111
8 Press the Status tab to open the Status dialog
This indicates the current status of the device
– Gray fields are parameters loaded from the device memory
–Press Read to refresh the display
9 The significance of the parameters can be taken from the table below
Status parameters
Parameter Meaning
Device Status
Bit 0 to Bit 7 Standard HART status information
– A red dot indicates that the status is currently active
Command 48 Info
... Indicates information received by when Command 48 is sent to the device
– More information is available in the device manual