Operating instructions

WirelessHART Fieldgate SWG70 C Appendix: HART OPC Connection
Endress+Hauser 107
C.3.2 Adapter properties
1 Click on the first CH001 node in the first branch then right click on the Adapter Long Tag
that appears in the right workspace and select Properties
2The Adapter Properties dialog opens
The significance of the parameters can be taken from the table below
IO System Properties
Parameter Meaning
Adapter Identification
Tag Name A string identifying Fieldgate SWG70 - up to 32 characters.
Descriptor Additional user text decribing, e.g. function or location of adapter - up to 16 characters
Message User message, transmitted with information from Fieldgate SWG70 up to 32 characters
Manufacturer Indicates manufacturer of Fieldgate SWG70
Model Indicates device type string name
ID Indicates device identification
Revs Indicates Universal Revision, Device Revision, Software Revision, Hardware Revision
Properties
Poll Address HART bus address
Date Date on which the adapter was manufactured
Number of Preambles Number of preambles for HART communication
Operation
Master Mode Indicates whether the adapter is a primary or secondary HART host
Retries Indicates number of retries for HART communication
Statistics
Maximum Number of IO
Cards
Maximum number of cards offered by the adapter
Maximum Number of IO
Channels per IO Card
Maximum number of IO loops (channels) that can be connected to each card
Maximum Number of
Instruments per Channel
Maximum number of instruments that adapter can store data for per channel
(in multidrop mode)
Number of Instruments
Detected
Number of instruments currently connected to the adapter