Operating instructions

WirelessHART Fieldgate SWG70 C Appendix: HART OPC Connection
Endress+Hauser 103
4The Network Properties dialog opens
– Enter a network Name
–Enter the Number of Retries
– Enter the Retry Delay Base in ms
–Press OK to register the changes and add the network to your project
NOTE!
• For "RS-485" you must enter a Name, Address (COM port), Baudrate and Retries.
5 With Fieldgate SWG70 connected to the selected computer port, right click on the network
and select Add I/O system
NOTE!
• For "RS-485" you can press Add Multiplexer... to invoke a similar procedure or Learn to
automatically scan the network.
6The Add Device dialog appears
–Enter the IP Address of Fieldgate SWG70 (default 192.168.1.1)
–Enter the Port (default 5094)
–Enter the Poll Address (= HART Polling Address, default 0)
– Select the UDP protocol
–Press Add to close the dialog and add the I/O system