Instruction Manual

Wireless TENS/EMS RS-18 Instruction Manual
9
Using Instruction
Prepare and Setup
If you are using new electrode or would like to replace the old hydrogel. Please following 2 steps to
implement it.
1. Carefully remote the blue protective film of new hydrogel
Note: dispose the blue protective film and should not use it for electrodes storage.
2. Place the gel pads according to the engrafted shape on electrode and remove the second protective
film with care. Make sure that the edge of the gel pad does not protrude outside the electrode.
Each side should have one gel pad attached to it.
Note: Each butterfly electrode should have two gel pads attached to it.
3. Remove transparent protective film and place the electrodes to the desire treating area
(Referencing with Section – Electrode Placement).
Note: Keep the skin clean and dry before placing electrodes in order to prolong the life of
electrodes.