Instruction Manual

Wireless TENS/EMS RS-18 Instruction Manual
24
Output description of the programs
Stimulation is not
producing the
usual sensation
Settings and Electrodes positioning A. Check that all the settings are
correct and ensure the
electrodes are positioned
properly
B. Change the positioning of the
electrodes slightly
NOTE: If your device appears to be malfunctioning for any reason other than those listed above, please
contact manufacturer or authorized distributor customer support.
Electrode
Problem Possible Cause Solution
Electrode failure
Poor electrode connection with the
cable
Check if the electrodes are connected
with the cable properly
Poor electrode connection with the skin Check if the electrodes are out of date,
worn and/or the contact is poor: try with
new electrodes
Battery Level
Problem Possible Cause Solution
Device battery low Due to depleted battery, the device
may turn off during stimulation
The stimulation should be stopped and
the device should be recharged.
Disposal
When the RS-18 Remote Controller and Pod(s) have reach to the end of its life, do not dispose
of it with regular household wastes.
The Remote Controller and Pod(s) are electronic device that should be disposed of in accordance with
local recycling standards as any other electronic wastes.
When the RS-18 electrodes no longer sticky to the skin, are contaminated by bodily fluids, or no
treatments are left, discard them. Used electrodes should be disposed of according to local rules for
regular or infectious waste disposal.