Instruction Manual

Wireless TENS/EMS RS-18 Instruction Manual
15
Charge the device
1. Stop the program first.
2. Turn off Remote Control and Pod(s) by pressing for 3 seconds.
3. Connect the Type C USB charging cable in the USB Type C port of Remote or Pod(s)
4. Connect the Type A USB connector of charging cable to any international certificated 5V USB
adaptor. Remote control & Pod should be charged individually.
Once fully charge, the Remote control will show and stop the icon animation. The LED
indicator on Pod will change from white light to off.
Warning!
- Always use certificated 5V USB adapter for charging. Do not use any fast charge adapter; the
input voltage over 5.5 may damage the device.
- The power adaptor is easily accessible. The plug socket must be close to and easily accessible
from the power adaptor.
- If the Remote, Pods or the AC adaptor is damaged or open, do not use it. Electric shock is at
potential risk.
- If there is unusual heating or odor, or if the AC adaptor or the Remote Control and/or pod(s)
emits smoke, immediately disconnect the AC adaptor.