Data Sheet
Table Of Contents
- 1Overview
- 2Chip Dimensions
- 3Pin Definition
- 4Functional Description
- 4.1Direct Memory Access Controller (DMA)
- 4.2Independent Watchdog(IWDG)
- 4.3Window Watchdog(WWDG)
- 4.4General Purpose and Alternate Function(GPIO and AF
- 4.5Peripheral Interconnection
- 4.6Elliptic Curve Cryptography(ECC)
- 4.7Encryption(AES/DES)
- 4.8True Random Number Generator(TRNG)
- 4.9Calculating Accelerator(CALC)
- 4.10Advanced Timer(ADTIM)
- 4.11General-Purpose Timer(GPTIMC)
- 4.12Basic Timer(BSTIM)
- 4.13Low-Power Timer(LPTIM)
- 4.14Analog-to-Digital Converter(ADC)
- 4.15Real Time Clock(RTC)
- 4.16Inter-Integrated Circuit Interface(I2C)
- 4.17Serial Peripheral Interface 1(LSSPI)
- 4.18Serial Peripheral Interface 2(SPI2)
- 4.19Universal Asynchronous Receiver Transmitter(UART)
- 4.20Audio Interface (PDM)
- 4.21BLE
Wireless-Tag Technology Co., Ltd. V1.0.1
©2020 Wireless-Tag Technology Co., Ltd. All rights reserved.
http://www.wireless-tag.com
20
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations
or co-location with another transmitter), then the FCC authorization for this module in
combination with the host equipment is no longer considered valid and the FCC ID of the
module cannot be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a
separate FCC authorization.
End product labeling:
The final end product must be labeled in a visible area with the following: “Contains
Transmitter Module FCC ID: 2AFOS-WT5010-S2”.
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user's manual of the end product which
integrates this module. The end user manual shall include all required regulatory
information/warning as show in this manual.
Integration instructions for host product manufactures according to KDB 996369
D03 OEM
Manual v01
2.2 List of applicable FCC rules
FCC Part 15 Subpart C 15.247 & 15.207 & 15.209
2.3 Specific operational use conditions
The module is a Bluetooth module with BLE 2.4G function.
BLE Specification：
Operation Frequency: 2402~2480MHz
Number of Channel: 40
Modulation: GFSK
Type: PCB Antenna
Gain: 2 dBi
The module can be used for mobile or applications with a maximum 2dBi antenna. The host
manufacturer installing this module into their product must ensure that the final composit product
complies with the FCC requirements by a technical assessment or evaluation to the FCC rules,
including the transmitter operaition. The host manufacturer has to be aware not to provide information
to the end user regarding how to install or remove this RF module in the user's manual of the end
product which integrates this module. The end user manual shall include all required regulatory
information/warning as show in this manual.