Data Sheet

equipment is no longer considered valid and the FCC ID of the module cannot be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate FCC authorization.
End product labeling:
The final end product must be labeled in a visible area with the following: “Contains Transmitter Module
FCC ID: 2AFOS-WT32C3-SX”.
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install
or remove this RF module in the user's manual of the end product which integrates this module. The end
user manual shall include all required regulatory information/warning as show in this manual.
Integration instructions for host product manufactures according to KDB 996369 D03 OEM
Manual v01
2.2 List of applicable FCC rules
FCC Part 15 Subpart C 15.247 & 15.207 & 15.209
2.3 Specific operational use conditions
The module is a Bluetooth module with WiFi & BLE 2.4G function.
WiFi Specification：
Operation Frequency: 2412~2462MHz
Number of Channel: 11
Modulation: DSSS, OFDM
Type: PCB Antenna
Gain: 2 dBi
BLE Specification：
Operation Frequency: 2402~2480MHz
Number of Channel: 40
Modulation: GFSK
Type: PCB Antenna
Gain: 2 dBi
The module can be used for mobile or applications with a maximum 2dBi antenna. The host
manufacturer installing this module into their product must ensure that the final composit product
complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including
the transmitter operaition. The host manufacturer has to be aware not to provide information to the end
user regarding how to install or remove this RF module in the user's manual of the end product which