Data Sheet

IDO-SOM2D01 DATASHEET
Wireless-Tag Technology Co., Limited http://www.wireless-tag.com
Shenzhen Tactile Intelligent Technology Co., Ltd. http://www.industio.com
The detailed specifications of the module are as follows:
Items Specifications
CPU SigmaStar SSD201
ARM® Cortex-A7 dual-core processor, up to 1.2GHz
Video processor Supports max. resolution FHD (1920x1080)/60fps decoding, H.265/HEVC
Decoder, I/P/B slices ， all intra-prediction modes, all inter-prediction
modes, supports max. resolution HD (1920x1080)/60 fps decoding
Power supply Input voltage 3.3V
RAM
SSD201 embedded DDR2 memory, 64MB; supports auto-
refresh and self-refresh mode，
Storage Supports 1/2/4-bit SPI-NOR/SPI-NAND Flash，default 128MB（Up to
2GB）
System Linux
Ethernet Supports two Ethernet ports，supports 10/100Mbps half/full duplex，one
built-in 10/100M Ethernet PHY, supports one RMII to connect external
Antennas
Type: FPC Antenna
Gain: 3dBi
This device is intended only for host manufacturers under the conditions:
The transmitter mdule may not be co-Iocated with any other transmitter
or antenna;
The module shall be only used with the intemal antennas that has been
originally tested and certified with this module. The antenna must be
either permanently attached or employ a 'unique' antenna coupler.
As long as the conditions above are met, further transmitter test will not
be requtred. However, the host manufacturer is still responsible for
testing their end-production for any additional compliance requirements
required with this module installed(for example, digital device emissions,
PC peripheral requirements, etc)