Installation Manual
39
CONFIDENTIAL UNDER NON-DISCLOSURE AGREEMENT (NDA)
Rev A1
Document:
WSS 4G Ground Installation Manual 750-
00004-00 Reva1.Docx
July -30
2020
8.0
MAINTENANCE AND REPAIR
8.1
General
This section provides troubleshooting, maintenance and repair guidance for the
WSS 4G system.
8.2
Maintenance
The WSS 4G system requires no periodic routine maintenance.
8.3
Recommended Periodic Scheduled Servicing Tasks
Perform the following inspections at a minimum of once a year; during regularly
scheduled maintenance, either 100 hour, annual, or other approved maintenance
interval.
1.
During any maintenance activities involving the WSS System perform a
post-installation check as described within this Installation Manual.
2.
Inspect the WSS radio system wire/bundle and coax cable routing for
evidence of damage, chafing, grounding, security, bonding, integrity of shields,
and connector backshell condition.
3.
Visually inspect the RRH radio mechanical installation for any defects or
damage to the aircraft structure or to the RRH radio.
4.
Visually inspect the Beam Forming Antennas.
5.
Verify that all mandatory Service Alerts and/or Service Bulletins for the ABR radio
have been accomplished.
8.4
Repair
Please contact Satcom Direct or applicable Service Provider to initiate troubleshooting
and issue resolution procedures.
Satcom Direct can be reached by telephone at +1 (321) 777-3000 or email at
support@satcomdirect.com
8.5
Hardware & Software Updates
Hardware and Software updates will be communicated though Service and Installation
Partners. Please contact support@wireless2.com with questions regarding RRH
updates at this time.