Installation Manual

5
CONFIDENTIAL UNDER NON-DISCLOSURE AGREEMENT (NDA)
Rev A1
Document:
WSS 4G Aircraft Installation Manual 750-
00003-00 Reva1.Docx
July -30
2020
Table 1.5.2-2 Optional WSS Provided Material
Quantity
Description
Part Number
1
ABR P2 CONNECTOR KIT
765-00033-22
(1) TE Connectivity/Deutsch 4-Bay DMC
Harness Housing (P2)
DMC-M 80-01
(3) TE Connectivity/Deutsch DMC Chimney,
Non-rotation
732-8052-18A
(3) TE Connectivity/Deutsch 20x22 GA Socket
Module Insert Kit (P2-A, P2-C, P2-D)
DMC-M 20-22SN
(1) TE Connectivity DMC Harness EMI
Backshell, 4-Bay (P2)
732-8052-10 A
(1) TE Connectivity/Deutsch DMC Blank
Chimney (P2)
732-8052-13A
1
ABR P1 CONNECTOR KIT
765-00034-22
(1) TE Connectivity/Deutsch 12 GA Socket
Module Insert (P1-A)
DMC-M 04-12SN
(1) TE Connectivity/Deutsch 20x22 GA Socket
Module Insert Kit (P1-B)
DMC-M 20-22SN
(1) TE Connectivity/Deutsch DMC Harness
EMI Backshell, 2-Bay (P1)
732-8052-14A
(2) TE Connectivity/Deutsch DMC Chimney,
Non-rotation (P1)
732-8052-18A
(1) TE Connectivity/Deutsch 2-Bay DMC
Harness Housing (P1)
DMC-M 40-01
1.5.3 Installer-Provided Material
Table 1.5.3-1 contains additional material needed for WSS 4G LTE System
installation which are not provided and are the responsibility of the installer for their
unique aircraft installation. Refer to Section 3.4 for any special tooling required for
installation.
Table 1.5.2-3 Installer-Provided Material
Quantity
Description
Part Recommendations
1
3/8 ATR Mounting Tray
(For Aircraft Base Radio installation)
B/E Aerospace MT4-3333
1
50 Ohm RF Terminator
(To be Installed on ABR Connector Panel)
Bracket Mfg. BM11037 or Equivalent
18
Tie-down Straps
600-057
2
Boot Seal
HSB-2-1 or equivalent
2
TE Connectivity
Solder Sleeve (.275IDXx .750LG)
M83519/1-5