User guide

Transmitters
Wi-Spy Mode: Chanalyzer will attempt to automatically identify transmitters from the
Signatures tab. This display option will toggle on the drawing of detected transmitters within
the threshold settings.
CleanAir Mode: When connected to a CleanAir AP, Chanalyzer will draw overlays around the
channels that an interfering device is affecting. Simply check the box in the “Interfering
Devices” tab next to the devices you are interested in.
Outline (Wi-Spy Mode Only)
This represents the line Chanalyzer attempts to match patterns to. This is most often used in
creating a classifier.
Chanalyzer by MetaGeek USER GUIDE page 12