Specifications

RF Products Crestron Best Practices
20
•
Best Practices – RF Products Reference Guide – DOC. 6689E
Appendix: Channel Map Worksheet
For convenience, this appendix provides a blank channel map worksheet followed by
a checklist of the steps necessary to complete the channel map. If a site survey is
being conducted, it is suggested that this page be printed and included with the items
taken to the site location.
Channel Map Worksheet
CHANNEL NUMBERS
NETWORK
802.15.4
CHANNELS
Wi-Fi 802.11
CHANNELS
11 1
12 2
13 3
14 4
15 5
16 6
17 7
18 8
19 9
20 10
21 11
22
23
24
25
26
Complete the channel map according to the following checklist.
 Step 1: Eliminate the channels that were found to have too much
interference during the site survey.
 Step 2: Enter the 802.11b/g-only networks.
 Step 3: Enter the 802.11a/b/g/n networks.
 Step 4: Enter the Extended Range networks.
 Step 5: Enter the infiNET networks. Note that, in most systems, the
infiNET network should be set in Fixed mode to remain on the selected
channel. For smaller systems with only one or two infiNET gateways and
minimal interference detected in the system sweep, it is recommended
that the gateway be set to select the operating channel automatically.
 Step 6: Enter the infiNET EX networks. Note that infiNET EX
networks are always in Fixed mode and default to channel 15 first.
NOTE: If there is not enough free space to enter all networks on the
channel map worksheet using the steps above, select 802.11a channels
for some or all 802.11a/b/g/n networks, and then repeat steps 4–6.