User manual

5
W-DMX UglyBox MKII User Manual, edition 1
9 12 1815
10 13 19
16
11 14 2017
9: Open Link quality screen (Active when UglyBox is receiver). (See ”Menu B”)
10: Open link histogram screen (Active when UglyBox is receiver) (See ”Menu C”)
11: Open Log configuration screen (Active when UglyBox is receiver) (See ”Menu D”)
12: Open DMX input screen (Active when UglyBox is transmitter) (See ”Menu G”)
13: Open DMX output screen (Active when UglyBox is receiver) (See ”Menu F”)
14: Open RGB fixture screen (Active when UglyBox is receiver) (See ”Menu H”)
15: Open W-DMX Settings screen (See ”Menu E”)
16: Link receiver to this transmitter (Active when UglyBox is transmitter)
17: Unlink all linked receviers (Active when UglyBox is transmitter) or unlink this receiver
(Active when UglyBox is receiver)
18: Open settings menu (See ”Menu I”)
19: Activate lock function, need a pin code to unlock the unit. The pincode is displayed
and set in the Settings | Power | pin code screen. Default pincode is 1234
20: Turn off the unit
3.1 Linking receivers
3. Linking/unlinking operation
When the UglyBox is operating as transmitter, you need to link the receivers to be able to
investigate the link conditions.