User manual

3
W-DMX UglyBox MKII User Manual, edition 1
1. operation of uglybox mkii:
To power up the UglyBox, press the button for 3s and the display will turn on.
When the unit is powerd on, the button will always get you to the main screen.
Use UglyBox as Transmitter:
• Select the WDMX menu and setup the UglyBox as transmitter
• Select the output radio mode and output power
In the main menu, link or unlink your receivers, you have also access to a simple faders to set
the DMX level in the DMX out screen.
Use UglyBox as Receiver:
• Select the WDMX menu and setup the UglyBox as receiver
Link the UglyBox from the desired transmitter as you do with any W-DMX Receiver.
There are 4 ways to track the radio reception:
• In all menus, the momentary reception is displayed in the title bar
• Link Quality, shows the momentary reception
• Histogram, shows the reception over a selected period of time
• Log, if you have an SD card, you can setup the UglyBox to Log the reception level,
either automatically on a periodically basis or manually. When you log the reception
level automatically, you can insert extra points in the log file by pressing “Add
Point”, that is the operation when you have the manual log as well
The UglyBox has also the possibility to show the DMX levels or function as an RGB fixture.
1
2
3
4
1: Antenna
2: Power
3: SD card
4: Button