manual Uglybox mkii
contents 1. 2. 3. 3.1 3.2 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Operation of UglyBox MKII......................................................... 3 Menu A - ”Main Menu”................................................................. 4 Linking/Unlinking Operation................................................. 5 Linking Receivers................................................................... 5 Unlinking Receivers...............................................................
1. operation of uglybox mkii: To power up the UglyBox, press the button for 3s and the display will turn on. When the unit is powerd on, the button will always get you to the main screen. Use UglyBox as Transmitter: • Select the WDMX menu and setup the UglyBox as transmitter • Select the output radio mode and output power In the main menu, link or unlink your receivers, you have also access to a simple faders to set the DMX level in the DMX out screen.
2.
9 12 10 13 15 18 19 16 11 9: 10: 11: 12: 13: 14: 15: 16: 17: 18: 19: 20: 14 17 20 Open Link quality screen (Active when UglyBox is receiver).
Verify that the receivers are unlinked: On UglyBox, the unit is unlinked if the yellow “OEM LED Indicator” is off (see Menu A). If the “OEM LED Indicator” is flashing, the unit is linked and you need to unlink it by pressing “UNLINK” button on the main menu (see Menu A, item 17). On W-DMX RX units, if the LINK led is not off, the unit is linked, press and hold the red function switch for 5s until the LINK led turn off.
5. Menu C “Histogram” Shows reception level in % over time, time can be set to 30s, 1 minute or 30 minuts time. 6. Menu D “Log” Configuration for log file.
7. Menu E: “WDmX” 1 2 3 4 5 9 10 6 7 8 1: 2: 3: 4: 5-7: 8: 9: 10: Set the radiocard in TX mode (radiocard restarts and screen is reloaded) Set the radiocard in RX mode (radiocard restarts and screen is reloaded) Select 2.4 GHz band as TX Select 5.8 GHz band (if available) as TX Select radio mode as TX Select output power as TX Radio card RDMUID Radio card label 8.
. Menu F2: ”DMX Out timing” 1 2 3 4 5 7 6 1: 2: 3: 4: 5: 6: 7: Select fast DMX output Select mid DMX output Select slow DMX output Select all slots to a specific value, a keypad is displayed to set the DMX value Set all slots to 0 Return to DMX Out screen Displays the timing values used for the selected timing setting 10.
11. Menu G2: ”DMX In timing” 1 2 1: 2: Displays the timing values read on the output Return to DMX In screen 12.
13.
15.
16.
ARE YOU WIRELESS? Head office: Stureparksvägen 7 451 55 Uddevalla Sweden Mail: sales@wirelessdmx.com Phone: +46 522 511 511 Web: wirelessdmx.
