Specifications

Ô
39
Wireless Connectivity Guide Texas Instruments 4Q 2014
Sub-1 GHz
CC1190
The CC1190 is range extender for
the sub-1-GHz low-power RF
transceivers and System-on-Chip
(SoC) devices from Texas Instru-
ments. The CC1190 integrates a power
amplifier (PA), a low noise amplifier
(LNA), switches, and RF matching
for the design of high-performance
wireless systems. The CC1190
increases the link budget by providing
a power amplifier for increased output
power, and an LNA with low noise
figure for improved sensitivity.
The CC1190 provides an efficient
and easy-to-use range extender in a
compact 4×4mm package.
Key features
• Seamlessinterfacetosub-1-GHz
low-power RF devices from TI
• Upto27dBm(0.5W)outputpower
• 2.9dBLNAnoisefigureincluding
switch and external antenna match
• Fewexternalcomponents:the
integrated PA, LNA, switches,
matching network and inductors
improve system performance over
typical discrete front end solutions
• Hightransmitpowerefficiency
PAE=50% at 26 dBm output power
Benefits
• Anintegratedfrontendreduces
development time by up to 70%
• UsingtheCC1190withevenasmall
6dB increase in link budget doubles
the range, making the CC1190 a
great choice for remote monitoring
• Acompactreferencedesignreduces
the board space for a front end by
up to 50%
Applications
• Wirelesssensornetworks
• Wirelessmeteringinfrastructure
• Wirelesssecuritysystems
• Wirelesslongrangeremote
monitoring
Development tools and software
• CC1101CC1190EMK915Evaluation
Module Kit
Sub-1-GHz Front End (850–950 MHz)
CC1190
Get samples, evaluation modules and application notes at:
www.ti.com/sc/device/CC1190
General Characteristics
Parameter Min Typ Max Unit
Supplyrange 2.0 3.7 V
Frequencyrange 850 950 MHz
Ambienttemperaturerange –40 85 °C
Powerdowncurrent 50 200 nA
RXmode
Receivecurrent,highgainmode 3 mA
Receivecurrent,lowgainmode 26 µA
Gain,highgainmode 11.6 dB
Gain,lowgainmode –6 dB
Input,1-dBcompression,highgain
mode
–12.3 dB
Noisegure,highgainmode 2.9 dB
TXmode
Transmitcurrent,26.5dBmoutput
power
302 mA
Outputpower 26.5 dBm
Poweraddedefciency,PAE 48 %
Output1-dBcompression 24 dBm
CC1190 block diagram.
LNA_OUT
PA _IN
PA _OUT
HGM
BIAS
PA _EN
LNA_EN
PREAMP
ENEN
LNA
EN
LOGIC
BIAS
LNA_IN
VDD_PA 1VDD_LNA
TR_SW
PA
VDD_PA 2