User manual

8 ProBox F-2500
42 W-DMX G4(S) User Manual, edition 2 2013-10
Hint
When you link the receivers for Universe 1, power on only
the respective receivers for Universe 1.
Once the receivers for Universe 1 are connected, you can
power on the receivers for Universe 2 and link them.
8.7 Operation as a receiver
The operation as a receiver is identical to the BlackBox and WhiteBox F-1, see
chapter "4.7 Operation as a receiver", page 22.
8.8 Operation as a repeater
Since the ProBox F-2500 provides 2 Universes, it is possible to use the unit as
a repeater. The operation is identical to BlackBox and WhiteBox F-2, see
chapter "6.8 Operation as a repeater", page 33.
8.9 Switching CTRL modes
The CTRL mode determines which frequency band is used in G4 mode and if
Legacy G2/G3 units can be used in the wireless environment.
Switching CTRL mode is identical to the BlackBox and WhiteBox F-1, see
chapter "4.8 Switching CTRL modes", page 23.
Hint
The ProBox F-2500 provides 2 Universes.
• Carry out the procedures for each Universe individually.
• Keep the two universes in the same mode to avoid
interference.