User manual

7 Micro units
36 W-DMX G4(S) User Manual, edition 2 2013-10
SIGNAL/BATT:
– SIGNAL identifies if the signal strength or battery power is displayed on
the LED bar.
– BATT is a coming feature.
Other LED signals are identical to F-1, see chapter 4.3 LEDs", page 15.
Hint
Micro F-1 Lite does not have the G4S 5.8 GHz mode.
7.1.4 Installing the unit
1. Choose one of the following options to make the DMX connection:
– Connect the DMX source to the DMX IN / OUT port.
– Connect the DMX fixture to the DMX IN / OUT port.
2. Connect the power supply to the DC power input.
7.1.5 Switching FLEX modes
The FLEX mode determines if the unit is used in Transmit Mode (TX) or
Receive Mode (RX). Switching the FLEX mode is identical to the BlackBox
F-1, see "4.5 Switching FLEX modes", page 19.
7.1.6 Operation as a transmitter
The operation as a transmitter is identical to the BlackBox and WhiteBox F-1,
see chapter "4.6 Operation as a transmitter", page 20.
7.1.7 Operation as a receiver
The operation as a receiver is identical to the BlackBox and WhiteBox F-1, see
chapter "4.7 Operation as a receiver", page 22.
7.1.8 Switching CTRL modes
The CTRL mode determines which frequency band is used and if
Legacy G2/G3 units can be used in the wireless environment.
Switching CTRL modes is identical to the BlackBox and WhiteBox F-1, see
chapter "4.8 Switching CTRL modes", page 23.
Hint
This unit does not support the G4S 5.8 GHz mode.