User manual

4 BlackBox and WhiteBox F-1
2013-10 W-DMX G4(S) User Manual, edition 2 17
– Unit with optional Ethernet lighting protocol support:
Connect the Ethernet lighting source or output to the Ethernet in port.
2. Attach the supplied standard antenna(s) and standard adapter(s) or other
suitable antenna(s) / adapter(s) available from Wireless Solution to the
matching connector(s).
Warning
Risk of death by electrocution!
AC power connection must be carried out correctly.
• Make sure that only a qualified and trained electrician
carries out AC power connection.
• Make sure the correct Schuko connector or other
connector suitable for your country is used.
3. Choose one of the following options to connect the power to the unit:
– Attach a suitable mains plug to the supplied power cord and connect the
power supply to the AC power input.
– Connect the power supply to the DC power input.
4. If required, attach the unit to the supplied mounting brackets or other
mounting hardware available from Wireless Solution.
4.4.2 WhiteBox F-1
1
3
2
4
Fig. 6: Housing of the WhiteBox models