User manual

4 BlackBox and WhiteBox F-1
2013-10 W-DMX G4(S) User Manual, edition 2 15
No. Port Description
1 AC power input U
AC
= 90–250 V / 50–440 Hz:
• Left: Outer conductor (L)
• Middle: Ground (GND)
• Right: Neutral conductor (N)
2 DC power input Phoenix gold connector U
DC
= 12 V:
• Left: Ground
• Right: U
DC
= +12 V
3 DMX OUT
for Universe 1
• Left: GND
• Middle: DMX Data – (Universe 1 OUT)
• Right: DMX Data + (Universe 1 OUT)
4 DMX IN
for Universe 1
• Left: GND
• Middle: DMX Data – (Universe 1 IN)
• Right: DMX Data + (Universe 1 IN)
5 Antenna ports Connector for antennas
6 Cord Strip For signal cable (DMX or Ethernet)
7 Cord Strip For DC power input (2)
8 Cord Strip For AC power input (1)
4.3 LEDs
Fig. 5: LEDs of F-1
Name LED signal Description
Signal
bar
– RX (receiver) mode: Currently received signal strength
TX (transmitter) mode: Yellow and green LEDs indicate
output power
TX • On: Unit in TX mode
• Flashing: Transmitter in repeater mode
LINK TX mode:
• On: Normal operation
• Flashing: Receivers are being unlinked
• Rapid flashing: Receivers are being linked