User manual

4 BlackBox and WhiteBox F-1
14 W-DMX G4(S) User Manual, edition 2 2013-10
No. Port Description
4 DC power input Phoenix gold connector 12 V DC:
• Left: Ground
• Right: +12 V DC
5 Cord Strip For signal cable (DMX or Ethernet)
6 DMX IN / OUT RJ 45 port:
1: Universe 1+ 5: –
2: Universe 1– 6: –
3: – 7: Universe 1 GND
4: – 8: –
7 Ethernet (optional) RJ 45 port
8 DMX IN
for Universe 1
(depeding on
production date)
• Left: GND
• Middle: DMX Data – (for Universe 1)
• Right: DMX Data + (for Universe 1)
4.2.3 WhiteBox F-1 MK II
Fig. 4: Connectors and ports of the WhiteBox F-1 MK II
To ensure safe transmission of signals for outdoor use, the WhiteBox does not
have XLR connectors. For this reason the connection of DMX signal cables
differs slightly from the BlackBox models, which are for indoor use only.
To install the unit it is necessary to open the housing. See
chapter "4.4.2 WhiteBox F-1", page 17.