User manual

4 BlackBox and WhiteBox F-1
2013-10 W-DMX G4(S) User Manual, edition 2 13
No. Port Description
8 DC power input Input for Phoenix gold connector:
• Left: Ground
• Right: U
DC
= +12 V
9 DMX OUT bypass XLR female 3 pin (BlackBox MK II only)
10 DMX IN for
Universe 1
XLR male 3 pin output for Universe 1 (BlackBox MK II only)
4.2.2 WhiteBox F-1 MK I
Fig. 3: Connectors and ports of the WhiteBox F-1 MK I
To ensure safe transmission of signals for outdoor use, the WhiteBox does not
have XLR connectors. For this reason the connection of DMX signal cables
differs slightly from the BlackBox models, which are for indoor use only.
To install the unit it is necessary to open the housing. See
chapter "4.4.2 WhiteBox F-1", page 17.
No. Port Description
1 Cord Strip For AC power input (2)
2 AC power input U
AC
= 90–250 V / 50–440 Hz:
• Left: Outer conductor (L)
• Middle: Ground (GND)
• Right: Neutral conductor (N)
3 Cord Strip For DC power input (4)