User manual

7 Micro units
7.2.3 LEDs
Fig. 13: LEDs of Micro R-512 Lite
SIGNAL/BATT: Identifies if the signal strength or battery power is displayed on
the LED bar.
Other LED signals are identical to F-1, see chapter “4.3 LEDs“, page 14.
Note
• Micro R-512 Lite does not have the G4 5.8 GHz mode.
• Micro R-512 Lite does not have a transmission
function, LED “TX” is never used.
• Micro R-512 Lite does not have RDM support.
7.2.4 Installing the unit
Installation is identical to the Micro F-1 Lite, see chapter "7.1.4 Installing the
unit", page 32.
7.2.5 Operation as a receiver
Operation as a receiver is identical to the BlackBox and WhiteBox F-1, see
chapter "4.7 Operation as a receiver", page 21.
7.2.6 Switching CTRL modes
The CTRL mode determines whic
h frequency band is used and if
Legacy G2/G3 units can be used in the wireless environment.
Switching CTRL mode is identical to the BlackBox and WhiteBox F-1, see
chapter "4.8 Switching CTRL modes", page 21.
Hint
This unit does not
• support G4 5.8 GHz mode,
• support RDM,
• have CTRL mode
(receivers detect the right mode automatically).
2012-02 W-DMX G4 User Manual, edition 1 35