User manual

6 BlackBox and WhiteBox F-2
6.6 Operation as a transmitter
Operation as a transmitter is identical to the BlackBox and WhiteBox F-1, see
chapter "4.6 Operation as a transmitter", page 18.
Carry out the procedures for each universe individually.
Hint
When you link the receivers for Universe 1, power-on only
the respective receivers for Universe 1.
Once the receivers for Universe 1 are connected, you can
power-on the receivers for Universe 2 and link them.
6.7 Operation as a receiver
Operation as a receiver is identical to the BlackBox and WhiteBox F-1, see
chapter "4.7 Operation as a receiver", page 21.
Carry out the procedures for each universe individually.
6.8 Switching CTRL modes
The CTRL mode determines which frequency band is used in G4 mode and if
Legacy G2/G3 units can be used in the wireless environment.
Switching CTRL mode is identical to the BlackBox and WhiteBox F-1, see
chapter "4.8 Switching CTRL modes", page 21.
Note
The F-2 unit provides 2 universes.
• Carry out the procedures for each universe individually.
30 W-DMX G4 User Manual, edition 1 2012-02