User manual

4 BlackBox and WhiteBox F-1

All G4 receivers automatically detect the mode the transmitter is in and adapt

to it.

To change the CTRL mode, proceed as follows:

 The unit is in Transmit Mode (TX), working as a transmitter.

1. Press and hold the function button on the front panel (1) for at least

10 seconds.

Hint

Keep holding the button even if the LINK LED starts

blinking. This allows you to go through the unlink mode

without unlinking.

 The CTRL LED (2) flashes. The unit is in CTRL mode.

2. Release the function button.

3. Press the function button repeatedly until the desired mode is displayed via

the status of the G4 LED:

– G3 2.4 GHz mode: G4 LED is off

G4 (off)

– G4 2.4 GHz mode: G4 LED is on

G4 (on)

– G4 5.8 GHz mode: G4 LED flashes

G4 (flashing)

 The desired mode is set.

4. Power-cycle the unit to leave control mode and restart operation.

22 W-DMX G4 User Manual, edition 1 2012-02