User manual

4 BlackBox and WhiteBox F-1

2. Press and hold the function button on the front panel (1).

3. Reconnect the power cable.

4. Release the function button.

 The mode is switched. The LEDs indicate the current mode: either TX (1)

or RX (2):

4.6 Operation as a transmitter

 The unit is in Transmit Mode (TX), working as a transmitter.

4.6.1 Prerequisites for successful linking with receivers

Hint

The figures are maximum figures and depend on output

levels. Local settings may be required. For advanced

settings and projects, contact your distributor.

For successful linking, the receiver must fulfill the following conditions:

 Distance to transmitter (air): up to 200 m (Micro units)

 Distance to transmitter (air): up to 500 m (BlackBox, WhiteBox and ProBox

in ETSI mode)

18 W-DMX G4 User Manual, edition 1 2012-02