User manual

4 BlackBox and WhiteBox F-1
2012-02 W-DMX G4 User Manual, edition 1 13
No. Port Description
8 DC power input Input for Phoenix Gold Connector:
• Left: Ground
• Right: +12 V DC
9 DMX OUT bypass XLR female 3 pin (BlackBox MK II only)
10 DMX IN XLR male 3 pin (BlackBox MK II only)
4.2.2 WhiteBox
Fig. 3: Connectors and ports of the WhiteBox
On the WhiteBox models there are no XLR connectors to ensure safe
transmission of signals for outdoor use. For this reason the connection of
DMX signal cables differs slightly from the BlackBox models, which are for
indoor use only.
For installation of the unit it is nessecary to open the housing. Refer to the
chapter “4.4 Installing the unit“ > “4.4.2 WhiteBox“, page 16.
No. Port Description
1 Cord Strip For AC power input (2)
2 AC power input 90 – 250 V AC
• Left: Outer conductor (L)
• Middle: Ground (GND)
• Right: Neutral conductor (N)
3 Cord Strip For DC power input (4)