User's Manual

Draft
44 RT 1000 v1.3 Deployment Guide R03.d
© 2010-2011 Wireless Seismic, Inc. All rights reserved.
Backhaul
Configure the Radios
4 Verify that the radio powers up. The LED indicators have the following
meanings:
5 Click the Windows Start icon.
6 Select Control Panel. The Control Panel window opens.
7 Select Network and Internet.
Figure 4–17 Fluidmesh Radio Private Network
Table 4–5 Fluidmesh Radio LEDs
LED State Description
Power On / Green On whenever the radio has
power
LAN On / Green On whenever the radio has an
Ethernet connection
Signal Strength (1) On / Red
BootingCoresystem
Signal Strength (2) On / Orange
Bootingwirelesssystem
Signal Strength (3) On / Green
Bootingroutingengine
Signal Strength (4) On / Green
Bootingunitconfiguration