User's Manual

Draft

R03.d RT 1000 v1.3 Deployment Guide 13

Layout

Preparing the Equipment

● Any other shot-related equipment

● Two-way radios

2.3 Preparing the Equipment

Ensure that the central recording system has the latest software available installed

(see in the RT 1000 Release Notes).

Ensure that the ground equipment has the latest firmware available installed (see

in the RT 1000 Release Notes).

Ensure that the industry standard best practices are followed for securing the

equipment for transport.

2.4 Setting Up the Central Recording System

You can prepare the central recording system hardware and software while the

ground equipment is being placed in the field.

Set up the computer and peripheral equipment in the central recording system

truck or trailer.

2.4.1 Setting up the Computer

TBD

2.4.2 Connecting to the Source Controller

This section describes how to connect a source controller or Source Interface Unit

(SIU) to the CSS computer.

TBD

The following figures and tables show the signals on each pin for the three possible

cables used to connect an SIU to the CSS computer:

Table 2–1 BSU DATA-POWER Cable Pin List

Signal

Name

Wire Color

27-Pin

Connector

RJ45

Connector

16-Pin

Connector

2-Pin

Connector

Twisted

Pair

TX+ WHT/ORG *

(WHT/GRN)

R1——

Twisted Pair

TX- ORG *

(GRN)

P 2 — —