User's Manual

Draft
R03.d RT 1000 v1.3 Deployment Guide 69
© 2010-2011 Wireless Seismic, Inc. All rights reserved.
Backhaul
Installing Two Radios on the Mast
4.5 Installing Two Radios on the Mast
When you are installing a remote backhaul, there can be two radios on the mast
as shown in the following figure:
To install two radios on the mast:
1 Prerequisites:
TBD
The radios are configured to allow the PoE option (see step 11 on page 56).
The radios are BOTH configured as mesh POINTS (see step 6 on page 54).
2 Attach two radios to the mast. Refer to the deployment instructions for the
location at which to aim the radio. One should point towards the recording
Figure 4–45 Two-Radio Installation