User's Manual

Draft
68 RT 1000 v1.3 Deployment Guide R03.d
© 2010-2011 Wireless Seismic, Inc. All rights reserved.
Backhaul
Setting up the Backhaul Equipment
19 Check to make sure that the antennas are aimed properly.
20 Uncoil an Ethernet cable. Attach one end to the BSU and the other end to the
PoE.
21 Check Ethernet status lights, if not green or flashing green remove Ethernet
cable from the PoE, count to five and re-insert.
22 If status does not change to green or flashing green report the condition.
Figure 4–44 Backhaul Antenna Erected