User's Manual

Draft
16 RT 1000 v1.0 Deployment Guide R00.f
© 2010-2011 Wireless Seismic, Inc. All rights reserved.
Layout
At the Site
2.3.2 Laying Out the Equipment
2.3.2.1 Prerequisites
Define the prerequisites.
The RT 1000 shall be used with only the supplied antennas (Table 8–1 Antenna
Specifications, on page 29) attached to the WRU with an integrated type N male
connector.
 The RT 1000 antennas shall be installed and handled by professionals
specifically designated for this purpose.
 Changes or modifications not expressly approved by Wireless Seismic, Inc. can
void the users’s authority to operate the equipment.
2.3.2.2 Placing the Equipment in the Field
List each piece of equipment with photo and call outs.
2.3.2.2.1 WRU
2.3.2.2.2 BSU
2.3.2.2.3 LTU
2.3.2.2.4 Geophone
WARNING
In order to comply with FCC radio frequency (RF) exposure
requirements, the RT 1000 units must be installed so that a minimum
separation distance of 20 cm is maintained between the antenna(s) and
all persons at all times during normal operation.
TBD
Figure 2–1 WRU