User's Manual Part 2

Draft
144 RT System 2 v2.3.0 Deployment Guide R01.b
© 2010-2013 Wireless Seismic, Inc. All rights reserved.
A. Legal Information
Industry Canada Compliance
FCC equipment authorization has been granted as follows:
 The 5Mbps Line Interface Unit has been granted FCC equipment authorization.
 The 5Mbps Wireless Remote Unit has been granted FCC equipment authorization.
A.2 Industry Canada Compliance
The Wireless Remote Unit has been granted Industry Canada (IC) approval and certification
per RSS-210 Issue8 and RSS-102 Issue 4.
This Class A digital apparatus complies with Canadian ICES-003.
The Line Interface Unit (LIU) has been granted Industry Canada (IC) approval and
certification per RSS-210 Issue 8 and RSS-102 Issue 4.
This Class A digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
 This device may not cause harmful interference, and
 This device must accept any interference received, including interference that may cause
undesired operation.
A.3 CE Compliance
The Wireless Remote Unit (WRU) and Line Interface Unit (LIU) comply with applicable EU
directives for the Conformité Européene (CE) mark. The following mark is affixed to each
unit.
OSTRZEŻE
W celu spełnienia wymogów ekspozycji częstotliwości radiowej (RF), RT System
2 jednostki muszą być zainstalowane tak, że minimalna odległość 20 cm jest
utrzymywane między znajdować się w położeniu i ciała wszystkich osób przez
cały czas podczas normalnej pracy.
Figure A–1 CE Mark