User's Manual Part 2

Draft
134 RT System 2 v2.3.0 Deployment Guide R01.b
© 2010-2013 Wireless Seismic, Inc. All rights reserved.
6. Demobilization
Disassemble the WRU
4 Optional: Remove batteries, antenna, or geophone as described in “Disassemble the
WRU” on page 134.
6.3 Disassemble the WRU
This section describes the process to disassemble the WRU prior to demobilization.
To disassemble the WRU:
1 Undeploy the equipment as described in “Removing the WRU from the Field” on page
133.
2 Remove the antenna (and extender) from the unit.
3 Remove the geophone from the unit.
4 Remove the batteries from the unit.
● Press the catch on the battery latch.
● Lift the lever, but do not lift the bail from the molded area on the battery.
● Continue to lift the lever using the bail to push the battery out of the connector.
Figure 6–2 Undeployed Unit