User's Manual Part 2

Draft
R01.b RT System 2 v2.3.0 Deployment Guide 119
© 2010-2013 Wireless Seismic, Inc. All rights reserved.
5. Point-to-Multipoint Backhaul
Final Communication Test
2 Make a note of the line segment radio IP addresses, or keep the Discovery window open
for easy reference:
______.______.______.______
______.______.______.______
______.______.______.______
______.______.______.______
3 The speed test should be run from the recording truck radio to the line segment radios.
Log in to the recording truck radio as described in step 2 on page 105 through step 8 on
page 107.
4 Verify that browser pop-ups are allowed:
► Firefox – Tools → Options → Content → clear the Block pop-up
windows check box
→click OK
► Internet Explorer – Tools → Internet Options → Privacy → clear the
Turn on Pop-up Blocker check box
→ click OK
5 Click Tools
→ Speed Test.
6 In the Speed Test window, perform the following steps:
a Click the IP address for a line segment radio in the Select Destination IP list:
Figure 5–19 Tools, Speed Test