User's Manual Part 1

Draft

80 RT System 2 v2.3.0 Deployment Guide R01.b

4. Point-to-Point Backhaul

Final Communication Test

To run the speed test:

1 Verify that all radios are listed in the Ubiquiti Discovery Tool as described in step 4 on

page 70 through step 6 on page 71.

2 Make a note of the following IP addresses:

● The last radio in the line segment, that is, the radio farthest away from the recording

truck:

______.______.______.______

● The radio at the recording truck:

______.______.______.______

3 The speed test should be run from the recording truck radio to the radio farthest from

the recording truck. Log in to the recording truck radio as described in step 4 on page 70

through step 8 on page 72.

4 Verify that browser pop-ups are allowed:

► Firefox – Tools → Options → Content → clear the Block pop-up

windows check box

→ click OK

► Internet Explorer – Tools → Internet Options → Privacy → clear the

Turn on Pop-up Blocker check box

→ click OK

5 Click Tools

→ Speed Test.

6 In the Speed Test window, perform the following steps:

a Click the IP address for the radio farthest from the recording truck in the Select

Destination IP list:

Figure 4–18 Ubiquiti airOS Tools