User's Manual Part 1

Draft
64 RT System 2 v2.3.0 Deployment Guide R01.b
© 2010-2013 Wireless Seismic, Inc. All rights reserved.
4. Point-to-Point Backhaul
Overview
The radios are configured as pairs and are either an Access Point (A) or a Station (S).
An Access Point communicates only with a Station. An Access Point cannot communicate with
an Access Point, and a Station cannot communicate with a Station.
The poles (masts) and radios for a six-channel system are labeled and color-coded as
follows. The number of colors used should match the number of channels used.
Where:
 Label Nomenclature:
 S = Station
 A = Access Point
 The pole pairs must remain in sequential order:
● Radio 1:A-P1 communicates only with Radio 1:S-P2
● Radio 2:A-P2 communicates only with Radio 2:S-P3
● And so on until pole 18, where Radio 18:A-P18 communicates only with Radio 18:S-
P1
Pole Radio Color Pole Radio Color
Pole 1 18:S-P1 White Pole 10 9:S-P10
Red
1:A-P1
Black 10:A-P10 Green
Pole 2
1:S-P2
Black
Pole 11
10:S-P11 Green
2:A-P2
Yellow 11:A- P11
Blue
Pole 3 2:S-P3
Yellow Pole 12 11:S-P12
Blue
3:A-P3
Red 12:A-P12
White
Pole 4 3:S-P4
Red
Pole 13
12:S-P13
White
4:A-P4
Green
13:A-P13
Black
Pole 5 4:S-P5
Green
Pole 14 13:S-P14
Black
5:A-P5
Blue 14:A-P14
Yellow
Pole 6 5:S-P6
Blue
Pole 15
14:S-P15
Yellow
6:A-P6 White 15:A-P15
Red
Pole 7 6:S-P7 White Pole 16 15:S-P16
Red
7:A-P7
Black 16:A-P16 Green
Pole 8 7:S-P8
Black
Pole 17
16:S-P17 Green
8:A-P8 Yellow 17:A-P17
Blue
Pole 9 8:S-P9 Yellow Pole 18 17:S-P18
Blue
9:A-P9
Red
18:A-P18 White
Table 4–1 Label Nomenclature
Pair # : A or S - Pole #
2:A-P2
2:S-P3