User's Manual Part 1

Draft
R01.b RT System 2 v2.3.0 Deployment Guide 49
© 2010-2013 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Setting up the Backhaul
7 Position four stakes equal distances apart at
approximately 20 ft (6 m) from the base. Pound
them into the ground.
8 Assemble the radios and brackets:
● Bullet line radio installation – Assemble the
Bullet radios and brackets.
► Insert the 4 in hose clamp [LR-11] in the
side slots of the bracket [LR-6].
► Insert the 2 in hose clamp [LR-12] in the
center slots of the bracket [LR-6].
► Insert the line radio between the bracket
[LR-6] and the 2 in hose clamp [LR-12].
► Tighten the 2 in hose clamp
[LR-12]around the radio.
Line radio in bracket:
Table 3–10 How to Set Up the Backhaul
Step Image