User's Manual

5Mbps Draft
R03.h RT 1000 1.5.0 Deployment Guide 39
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Backhaul Components
3.2.2 Antennas
The following table lists the supported antennas for the BSUs and the WRUs. The
remote and central backhauls use the same antennas:
The Fluidmesh radios have built-in antennas (see “Radio Kit Components” on page
39 for details).
There is an auto-power-leveling feature built into the firmware. It works in
conjunction with the RSSI parameters to keep the power at a defined level.
3.2.3 Radio Kit Components
The following table lists the Radio Kit components:
Refer to the Fluidmesh datasheet for FCC information and other technical
specifications on the FM1100 and FM3100 radios. See one of the following
locations for details:
 http://www.fluidmesh.com/press-room/product-literature/doc_details/160-
fluidmesh-mito-series
 “C. Fluidmesh Radio Specifications” on page 94
The Fluidmesh radios can operate on at 4.9 GHz, and 5.1 - 5.8 GHz. The preferred
frequency is configured through a user interface (see “Configure the Radios” on
page 46 for instructions).
Table 3–2 Antenna Specifications
Model
Frequency
(MHz)
Gain
Vertical
Bandwidth
Weight
Dimension
(Length x
Diameter)
WSI 65-0067 2400-2485 9 dbi 14° 0.8 lbs
0.5 kg
27 x 0.6 in
690 x 15 mm
WSI 6060-001-01 2400-2485 7 dBi 18° 0.6 lbs
0.3 kg
21 x 0.6 in
540 x 15 mm
WSI 65-0023 2400-2485 5 dBi 25º 0.5 lbs
0.2 kg
12 x 0.6 in
355 x 15 mm
WSI 65-0025 2400-2485 2 dBi @ 2.4 120° 1.6 oz
45.4 g
7.6 x 0.5 in
193 x 12.7 mm
Table 3–3 Radio Kit
Remote Backhaul Components Central Backhaul Components
Item Reference Item Reference
Radio, Fluidmesh® FM1100
(75-0014)
“FM1100 Radio”
on page 40
Radio, Fluidmesh® FM3100
(75-0014)
“FM1100 Radio”
on page 40
Software, Fluidmesh®
FM1100-30 (47-0006)
“FM3100 Radio”
on page 41
Software, Fluidmesh®
FM3100-30 (47-00067)
“FM3100 Radio”
on page 41