User's Manual

5Mbps Draft
R03.h RT 1000 1.5.0 Deployment Guide 37
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Backhaul Components
3.2.1.3 Battery and Power Supply
Power is supplied to the LTU components by way of a 24 Ah DC battery or power
supply.
Wireless Seismic, Inc. recommends using a protective battery case as shown in
the following figure:
Figure 3–6 PoE
TIP
The backhaul power requirements vary depending on the hardware in
use and period of use. For example, you may be using one or two
radios. Supply enough power to ensure there is enough power for the
entire duration of the time you are using the backhaul.
A 24 Ah battery is adequate if a recharged battery is installed for every
12 hours of use.