User's Manual

5Mbps Draft

30 RT 1000 1.5.0 Deployment Guide R03.h

2. Layout

Laying Out the Equipment

4 The unit will begin a series of internal and external tests. The LEDs on the top

of the unit indicate the current test and whether the unit passes or fails each

test.

2.5.4 Placing the BSU in the Field

The BSU is part of the backhaul configuration. See “3. Backhaul” on page 31 for

more information.

NOTE

See “D. LED Indicators” on page 100 for an explanation of the LED

status and error conditions.

If a WRU self test fails, the WRU will continue to the next test.

You can skip a self-test by tipping the WRU geophone down and then

returning it to the upright position (flat on the ground).