User's Manual

5Mbps Draft
R03.h RT 1000 1.5.0 Deployment Guide 19
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
2. Layout
Setting Up the Central Recording System
6 Connect the Pelton Vib Pro JE Connector to the WRU analog input (geophone
connector).
7 Power on the Pelton Vib Pro.
8 Set TimeBrk Act=LOW
(Start
→ Menu (B) → MORE → 15. HARDWARE SETUP → 1. TimeBrk Act :
HIGH).
9 Set the Start Delay=1000
(Start
→ Menu (B) → MORE → 10. RADIO → 11. StartDelay : 01000).
Figure 2–7 Pelton Vib Pro TimeBrk Act